12/26/2023 0 Comments Imo pumpThe IMO PUMP ACF 090 K5 IVBP is commonly used in applications such as oil and gas production, chemical processing, and marine industries. Motor: Electric or hydraulic drive, depending on the application.Mounting: Base-mounted, horizontal or vertical orientation. Construction: Cast iron pump casing, hardened steel rotor and idler, mechanical seal.Drive Shaft: Splined, 1.250" (31.75 mm) diameter.Differential Pressure: Up to 20 bar (290 psi).Flow Rate: Up to 90 cubic meters per hour (396 gallons per minute).Here are some of the specifications for the IMO PUMP ACF 090 K5 IVBP: The IMO ACF series is a range of rotary positive displacement pumps that are designed for handling a wide range of fluids, including oils, chemicals, solvents, and other viscous liquids. Normally, 60 mesh (0.01 inch- 238 micron) for light and 1/8-3/16 inch (3-5mm) openings for heavy oils are recommended.IMO PUMP ACF 090 K5 IVBP is a type of positive displacement pump that is used for pumping liquids with varying viscosities. They must be selected in consultation with the strainer vendor to prevent pump starvation. All other steel cased pumps have SAE 4-bolt socket weld flanges that are provided with the pump.įiltration- Inlet strainers are required to keep contaminants and abrasives out of the pump. Mounting- May be foot mounted in any orientation.Ĭonnections- All iron cased pumps and steel cased pumps sizes 87 through 95 are NPT connections. Counterclockwise optional on all but type N pumps and the 187M and 187Y sizes. Available as a canned motor/pump as well. Temperature- Type B: 0 to180 ° F (-18 to 82 ° C) Type H, I and N: 0 to 250 ° F (-18 to 121 ° C).ĭrive- Direct only. Viscosity- Type B and I: 33 to 3000 SSU (2.0 to 650CST). Inlet Pressure- 25 PSIG (5 BAR) maximum for types B, H and I. 350 PSIG (24.1 BAR) maximum type N providing differential pressure does not exceed 150 PSI (10.3 BAR). Outlet Pressure- 150 PSIG (10.3 BAR) maximum for types B, H and I. For applications requiring higher inlet and discharge pressures.Īccessories- Completely mounted, built to order pump/driver assemblies are available with baseplates, ANSI RF spool pieces, NEMA ∜ face adapters. Type N, cast iron cased, flange mount, sizes 118 through 200 only: Positive drive, balanced mechanical seal, neoprene o-rings, carbon on carbide sealing faces and external, permanently grease packed, deep groove ball bearing. For applications where pump shaft is within driving machinery enclosure allowing internal return to sump of shaft leakage. Type I: Integral flange mounted pump with sleeve bearing in lieu of a ball bearing and no shaft seal. Type H, sizes 118 through 200: Positive drive mechanical seal, fluoroelastomer o-rings and external high temperature, permanently grease packed, deep groove ball bearing- recommended for residual oils and all applications above 3000 SSU (650 CST). Type B, sizes 118 through 200: Buna N bellows friction drive mechanical seal, Buna N o-rings and standard external, permanently grease packed, deep groove ball bearing- recommended for distillate fuels and lubricating oil or hydraulic fluids. Seal & Bearing- Type B, sizes 87 through 95: Positive drive mechanical seal, Buna N o-rings and standard external, permanently grease packed, deep groove ball bearing for services up to 180☏ (82☌) and/or 25,000 SSU (5400 CST). Gaskets- Cellulose and non-asbestos fiber. Replaceable in all steel case models plus all versions of the 187/200 case size.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |